About
Mauldin Drilling, LLC has provided experienced water well drilling services in Southern New Mexico since 1972, serving residential and commercial clients from Williamsburg, NM. They specialize in drilling livestock, irrigation, and domestic wells, along with offering comprehensive pump installation, repair, and maintenance services. With over 40 years of expertise, the team also provides water well inspections, site planning, and options for solar pumping equipment. They serve communities throughout the Hatch, Arrey, and Hillsboro areas.
Regulatory Context
Well Drilling Regulations in New Mexico
Water well drilling contractors in New Mexico must hold a current state well-driller license and follow state well-construction standards that protect groundwater and aquifers. Look for contractors licensed by the New Mexico well-driller licensing board and members of the National Ground Water Association (NGWA). Drilling, casing, and well-completion work is regulated under state groundwater-protection programs and the federal Safe Drinking Water Act. Contact your state well-driller licensing board for specific licensing and permit requirements in your area.
See full well drilling regulations in New Mexico →
Frequently Asked Questions
How often should a water well be serviced in Williamsburg, New Mexico?
+
Most well owners in New Mexico should have their water well and pump inspected once a year, and the water tested at least annually for bacteria and contaminants. Homeowners in Williamsburg who notice changes in water pressure, taste, or clarity should schedule a service visit sooner. A licensed well driller can check the pump, pressure tank, casing, and water quality during a routine inspection.
What does it cost to drill a water well in Williamsburg?
+
Drilling a residential water well in Williamsburg, New Mexico typically costs between $3,500 and $15,000+, depending on well depth, geology, casing, and the pump system. Deeper wells, hard rock, and remote sites raise the cost. Request quotes from multiple licensed well drillers to compare depth estimates, casing, and pump packages.
Does a well driller need to be licensed in New Mexico?
+
Yes. New Mexico requires water well drilling contractors to hold a current state well-driller license issued by the state licensing board, and to follow state well-construction standards that protect groundwater. Membership in the National Ground Water Association (NGWA) is an added sign of professionalism. Always confirm a contractor's state license before hiring.
What are the signs my well pump needs replacement in Williamsburg?
+
Common signs a well pump is failing in Williamsburg include low or fluctuating water pressure, air spitting from faucets, rising electric bills, the pump running constantly, or no water at all. If you notice these symptoms, contact a licensed well driller or pump contractor. Many providers offer emergency service and can typically diagnose the pump and pressure tank within a day.
More Contractors in New Mexico
Listing data last checked: July 2, 2026
Regulatory Context
Well Drilling Regulations in New Mexico
Water well drilling contractors in New Mexico must hold a current state well-driller license and follow state well-construction standards that protect groundwater and aquifers. Look for contractors who are licensed by the New Mexico well-driller licensing board and who are members of the National Ground Water Association (NGWA). Drilling, casing, grouting, and well-completion work is regulated under state groundwater-protection programs and the federal Safe Drinking Water Act. Contact your state well-driller licensing board for specific licensing and permit requirements in your area.
→ See full well drilling regulations in New Mexico
Frequently Asked Questions
How often should a water well be serviced in Williamsburg, New Mexico?
Most well owners in New Mexico should have their water well and pump inspected once a year, and the water tested at least annually for bacteria and contaminants. Homeowners in Williamsburg who notice changes in water pressure, taste, or clarity should schedule a service visit sooner. A licensed well driller can check the pump, pressure tank, casing, and water quality during a routine inspection.
What does it cost to drill a water well in Williamsburg?
Drilling a residential water well in Williamsburg, New Mexico typically costs between $3,500 and $15,000+, depending on well depth, geology, casing, and the pump system. Deeper wells, hard rock, and remote sites raise the cost. Request quotes from multiple licensed well drillers to compare depth estimates, casing, and pump packages.
Does a well driller need to be licensed in New Mexico?
Yes. New Mexico requires water well drilling contractors to hold a current state well-driller license issued by the state licensing board, and to follow state well-construction standards that protect groundwater. Membership in the National Ground Water Association (NGWA) is an added sign of professionalism. Always confirm a contractor's state license before hiring.
What are the signs my well pump needs replacement in Williamsburg?
Common signs a well pump is failing in Williamsburg include low or fluctuating water pressure, air spitting from faucets, rising electric bills, the pump running constantly, or no water at all. If you notice these symptoms, contact a licensed well driller or pump contractor. Many providers offer emergency service and can typically diagnose the pump and pressure tank within a day.
Browse all well drillers in Williamsburg, New Mexico →
Browse Directory
More Well Drillers in New Mexico
Sandia Well Service, Inc
Edgewood, New Mexico
Wyatt Drilling Arizona LLC
Willcox, AZ, New Mexico
Murray Drilling Company
Bernalillo, New Mexico
3T Drilling, Inc.
Dumas, New Mexico
Zim Industries, Inc.
Fresno, New Mexico
Badger Western Exploration Inc
Silver City, New Mexico
Browse all well drillers in New Mexico →
Listing data last checked: July 2, 2026
