About
Carter Drilling, Inc provides comprehensive water well drilling and pump services for homes and properties throughout Alamogordo, NM, Otero County, and surrounding areas. Established in 1990, they offer expert well drilling, pump repair and replacement, water testing, well inspections, and specialized services like solar well systems and rain catchment. With over 30 years of experience, a New Mexico Driller License (WD1229), and electrical wiring certification (#ES10), they ensure access to clean, potable water. They also perform domestic, irrigation, geothermal, and environmental drilling.
Regulatory Context
Well Drilling Regulations in New Mexico
Water well drilling contractors in New Mexico must hold a current state well-driller license and follow state well-construction standards that protect groundwater and aquifers. Look for contractors licensed by the New Mexico well-driller licensing board and members of the National Ground Water Association (NGWA). Drilling, casing, and well-completion work is regulated under state groundwater-protection programs and the federal Safe Drinking Water Act. Contact your state well-driller licensing board for specific licensing and permit requirements in your area.
See full well drilling regulations in New Mexico →
Frequently Asked Questions
How often should a water well be serviced in Alamogordo, New Mexico?
+
Most well owners in New Mexico should have their water well and pump inspected once a year, and the water tested at least annually for bacteria and contaminants. Homeowners in Alamogordo who notice changes in water pressure, taste, or clarity should schedule a service visit sooner. A licensed well driller can check the pump, pressure tank, casing, and water quality during a routine inspection.
What does it cost to drill a water well in Alamogordo?
+
Drilling a residential water well in Alamogordo, New Mexico typically costs between $3,500 and $15,000+, depending on well depth, geology, casing, and the pump system. Deeper wells, hard rock, and remote sites raise the cost. Request quotes from multiple licensed well drillers to compare depth estimates, casing, and pump packages.
Does a well driller need to be licensed in New Mexico?
+
Yes. New Mexico requires water well drilling contractors to hold a current state well-driller license issued by the state licensing board, and to follow state well-construction standards that protect groundwater. Membership in the National Ground Water Association (NGWA) is an added sign of professionalism. Always confirm a contractor's state license before hiring.
What are the signs my well pump needs replacement in Alamogordo?
+
Common signs a well pump is failing in Alamogordo include low or fluctuating water pressure, air spitting from faucets, rising electric bills, the pump running constantly, or no water at all. If you notice these symptoms, contact a licensed well driller or pump contractor. Many providers offer emergency service and can typically diagnose the pump and pressure tank within a day.
More Contractors in New Mexico
Listing data last checked: July 2, 2026
Regulatory Context
Well Drilling Regulations in New Mexico
Water well drilling contractors in New Mexico must hold a current state well-driller license and follow state well-construction standards that protect groundwater and aquifers. Look for contractors who are licensed by the New Mexico well-driller licensing board and who are members of the National Ground Water Association (NGWA). Drilling, casing, grouting, and well-completion work is regulated under state groundwater-protection programs and the federal Safe Drinking Water Act. Contact your state well-driller licensing board for specific licensing and permit requirements in your area.
→ See full well drilling regulations in New Mexico
Frequently Asked Questions
How often should a water well be serviced in Alamogordo, New Mexico?
Most well owners in New Mexico should have their water well and pump inspected once a year, and the water tested at least annually for bacteria and contaminants. Homeowners in Alamogordo who notice changes in water pressure, taste, or clarity should schedule a service visit sooner. A licensed well driller can check the pump, pressure tank, casing, and water quality during a routine inspection.
What does it cost to drill a water well in Alamogordo?
Drilling a residential water well in Alamogordo, New Mexico typically costs between $3,500 and $15,000+, depending on well depth, geology, casing, and the pump system. Deeper wells, hard rock, and remote sites raise the cost. Request quotes from multiple licensed well drillers to compare depth estimates, casing, and pump packages.
Does a well driller need to be licensed in New Mexico?
Yes. New Mexico requires water well drilling contractors to hold a current state well-driller license issued by the state licensing board, and to follow state well-construction standards that protect groundwater. Membership in the National Ground Water Association (NGWA) is an added sign of professionalism. Always confirm a contractor's state license before hiring.
What are the signs my well pump needs replacement in Alamogordo?
Common signs a well pump is failing in Alamogordo include low or fluctuating water pressure, air spitting from faucets, rising electric bills, the pump running constantly, or no water at all. If you notice these symptoms, contact a licensed well driller or pump contractor. Many providers offer emergency service and can typically diagnose the pump and pressure tank within a day.
Browse all well drillers in Alamogordo, New Mexico →
Browse Directory
More Well Drillers in New Mexico
Statewide Drilling
Alamogordo, New Mexico
Sandia Well Service, Inc
Edgewood, New Mexico
Wyatt Drilling Arizona LLC
Willcox, AZ, New Mexico
Murray Drilling Company
Bernalillo, New Mexico
3T Drilling, Inc.
Dumas, New Mexico
Zim Industries, Inc.
Fresno, New Mexico
Browse all well drillers in New Mexico →
Listing data last checked: July 2, 2026
