About
Werner Water Systems, LLC, led by Alan Werner, Jr. with over two decades of experience, delivers comprehensive water system solutions across Connecticut and New York. They specialize in expert well drilling, water pump installation and repair, sophisticated water treatment for contaminants like radon and PFOS/PFOA’s, and irrigation pump systems. Fully licensed and insured, Werner Water Systems offers 24/7 emergency service and custom-designed solutions for both residential and commercial clients, utilizing high-quality parts and modern technology for reliable water systems.
Regulatory Context
Well Drilling Regulations in Connecticut
Water well drilling contractors in Connecticut must hold a current state well-driller license and follow state well-construction standards that protect groundwater and aquifers. Look for contractors licensed by the Connecticut well-driller licensing board and members of the National Ground Water Association (NGWA). Drilling, casing, and well-completion work is regulated under state groundwater-protection programs and the federal Safe Drinking Water Act. Contact your state well-driller licensing board for specific licensing and permit requirements in your area.
See full well drilling regulations in Connecticut →
Frequently Asked Questions
How often should a water well be serviced in Bridgewater, Connecticut?
+
Most well owners in Connecticut should have their water well and pump inspected once a year, and the water tested at least annually for bacteria and contaminants. Homeowners in Bridgewater who notice changes in water pressure, taste, or clarity should schedule a service visit sooner. A licensed well driller can check the pump, pressure tank, casing, and water quality during a routine inspection.
What does it cost to drill a water well in Bridgewater?
+
Drilling a residential water well in Bridgewater, Connecticut typically costs between $3,500 and $15,000+, depending on well depth, geology, casing, and the pump system. Deeper wells, hard rock, and remote sites raise the cost. Request quotes from multiple licensed well drillers to compare depth estimates, casing, and pump packages.
Does a well driller need to be licensed in Connecticut?
+
Yes. Connecticut requires water well drilling contractors to hold a current state well-driller license issued by the state licensing board, and to follow state well-construction standards that protect groundwater. Membership in the National Ground Water Association (NGWA) is an added sign of professionalism. Always confirm a contractor's state license before hiring.
What are the signs my well pump needs replacement in Bridgewater?
+
Common signs a well pump is failing in Bridgewater include low or fluctuating water pressure, air spitting from faucets, rising electric bills, the pump running constantly, or no water at all. If you notice these symptoms, contact a licensed well driller or pump contractor. Many providers offer emergency service and can typically diagnose the pump and pressure tank within a day.
More Contractors in Connecticut
Listing data last checked: July 2, 2026
Regulatory Context
Well Drilling Regulations in Connecticut
Water well drilling contractors in Connecticut must hold a current state well-driller license and follow state well-construction standards that protect groundwater and aquifers. Look for contractors who are licensed by the Connecticut well-driller licensing board and who are members of the National Ground Water Association (NGWA). Drilling, casing, grouting, and well-completion work is regulated under state groundwater-protection programs and the federal Safe Drinking Water Act. Contact your state well-driller licensing board for specific licensing and permit requirements in your area.
→ See full well drilling regulations in Connecticut
Frequently Asked Questions
How often should a water well be serviced in Bridgewater, Connecticut?
Most well owners in Connecticut should have their water well and pump inspected once a year, and the water tested at least annually for bacteria and contaminants. Homeowners in Bridgewater who notice changes in water pressure, taste, or clarity should schedule a service visit sooner. A licensed well driller can check the pump, pressure tank, casing, and water quality during a routine inspection.
What does it cost to drill a water well in Bridgewater?
Drilling a residential water well in Bridgewater, Connecticut typically costs between $3,500 and $15,000+, depending on well depth, geology, casing, and the pump system. Deeper wells, hard rock, and remote sites raise the cost. Request quotes from multiple licensed well drillers to compare depth estimates, casing, and pump packages.
Does a well driller need to be licensed in Connecticut?
Yes. Connecticut requires water well drilling contractors to hold a current state well-driller license issued by the state licensing board, and to follow state well-construction standards that protect groundwater. Membership in the National Ground Water Association (NGWA) is an added sign of professionalism. Always confirm a contractor's state license before hiring.
What are the signs my well pump needs replacement in Bridgewater?
Common signs a well pump is failing in Bridgewater include low or fluctuating water pressure, air spitting from faucets, rising electric bills, the pump running constantly, or no water at all. If you notice these symptoms, contact a licensed well driller or pump contractor. Many providers offer emergency service and can typically diagnose the pump and pressure tank within a day.
Browse all well drillers in Bridgewater, Connecticut →
Listing data last checked: July 2, 2026
